This equipment utilizes a modular disassembly and assembly platform based on automotive engine assemblies (with easy-to-install/disassemble design). The platform enables students to practice engine disassembly and assembly operations. After completing engine assembly, the unit can be operated to verify fitting accuracy. It is specifically designed for vocational colleges, technical institutes, and training institutions to fulfill practical teaching requirements in engine maintenance and repair education.The real operational diesel engine fully demonstrates the composition and working process of the diesel engine. The training bench consists of two parts: disassembly, turning, bench and operation detection console. The disassembly and overturning bench is composed of a diesel engine assembly and an engine disassembly frame that can be turned 360 degrees, and the operation and detection console is composed of a display, a cooling system, an oil supply system, a battery, etc. The disassembly and overturning bench with reducer can be turned and stationary at any angle in the axial direction, which can be convenient for disassembly and assembly training, and there is an oil receiving pan at the bottom, which is convenient for the collection of small parts, water and oil, and does not fall to the ground. The operation detection console frame is installed with the elements of all parts of the engine that start and run, such as water tank, oil tank and oil pump, display, ignition switch, etc., and the disassembly and assembly of the overturning bench for oil, water, gas, and electricity docking, which can run the engine and test the engine assembly effect. the training benchtop is made of 4mm thick high-grade aluminum-plastic panels that are corrosion-resistant, impact-resistant, pollution-resistant, fireproof and moisture-proof, and the surface is treated with primer by special technology; The panel is printed with a color circuit diagram that never fades, and the surface is sprayed with varnish; Students can intuitively compare the circuit diagram with the actual engine to understand and analyze the working principle of the control system. A display is installed on the training bench panel, which can display the engine speed and other parameters in real time. The training table panel is equipped with a detection terminal, which can directly detect the electrical signals of each sensor and actuator, such as resistance, voltage, current, etc., on the panel. The training bench is equipped with a power main switch, flywheel protective cover and other installation protection devices. The base of the training bench is welded with steel structure, the surface is treated by spraying process, and the self-locking caster device is flexible, safe, reliable, sturdy and durable. Specifications Dimensions: 1000×750×800 (L×W×H) Operating temperature: -40°C~+50°C Profile specifications: Q355D high-strength steel pipe
EN
