New energy vehicle electric steering power EPS linkage training platform

Product Overview:

Based on BYD's pure electric vehicle power steering, including steering machine, servo motor, steering column, steering wheel, steering front axle, tires, etc., it is suitable for secondary and higher vocational colleges and training institutions to power steering system for pure electric vehicles.

Features:

Cognitive teaching and training of BYD pure electric vehicle EPS electric power steering system, the composition structure and working process of electric power steering system; Demonstrate and learn, and conduct practical training on the following knowledge points: the functions and characteristics of electric power steering, the working principle of EPS, common faults and diagnostic methods of electric power steering, etc.; Configure intelligent fault assessment function: It is mainly composed of two independent systems: the teacher fault setting terminal and the student answering terminal, which are installed on the mobile terminal Above. The mobile teaching terminal for teachers can be connected with the fault setting module of the integrated teaching aid for fault setting. After the fault setting is completed, the student answers the assessment questions through the student's mobile learning terminal, and the results after the assessment are automatically stored in the execution module of the device, which is convenient for the teacher to query the results of each student. In order to facilitate the identification and measurement of sensors and actuators, and to reduce the plug damage caused by sensor and actuator plug plugging and unplugging while restoring the real vehicle detection scene, it is required to connect the detection end of ≥5cm in parallel next to the original vehicle wiring harness plug, and the detection end is made of transparent acrylic material by laser engraving and flat plate spraying, and the shape is required to be the same as the plane shape of the original car plug, and the measuring end adopts a special detection terminal, and the number of the measurement angle position and the name of the sensor actuator are marked. The electrical signals of the pins of each sensor, actuator and engine control unit, such as resistance, voltage, current, frequency signal, etc., can be detected directly on the measuring terminal. With the help of a multimeter and an oscilloscope instrument, real-time detection of parameter changes in various states. The training platform is assembled by aluminum profiles, and 4 casters are installed at the bottom of the training platform, which can move flexibly, and the casters are equipped with self-locking devices, which can fix the position.The training benchtop panelsprayed with circuit diagrams and equipped with detection ports, with the help of multimeter and oscilloscopes, real-time detection of parameter changes in various states. The training desk is equipped with a training instruction book.

Dimensions:

1300×820×1600 (L×W×H) Power supply: DC12V Operating temperature: -20°C~+60°C