EN
- Overview
- Recommended Products
Product Overview:
Based on the whole vehicle electrical system, it displays the composition of various systems of automotive electrical appliances such as automobile power distribution module system, instrument system, lighting system, wiper system, horn system, exterior mirror system, power window system, door lock system, smart key anti-theft system, gateway system, etc., displays all modules of body electrical appliances, and can carry out dynamic and static data collection and realize the functions of body electrical appliances on it. Equipped with a mechanical setting system, using a gold-plated U-shaped plug, the design method is reliable and stable, to meet the needs of diversified design, suitable for the teaching needs of general education colleges and training institutions of higher vocational and technical colleges for body electrical theory and maintenance training.
Features:
Motor assembly and adjustment area The motor assembly area is composed of motor assembly machine, drive motor, motor controller, reducer, reducer overturning mechanism, hand wheel and other components, which can be used for disassembly, maintenance, and commissioning of the motor assembly. The drive motor is selected from the original drive motor of new energy vehicles, mainly including rotor assembly, stator assembly, three-phase adapter plate, three-phase binding post, rear end cover, temperature sensor, rotary sensor, etc., and the matching and assembly machine can meet the user's needs for disassembly and debugging of the drive motor. The drive motor assembly machine should include long ejector pins, short ejector pins, stator fixing plates, lead screw nut mechanisms, locking sliders, hand wheel assembly machine bases and other components. The control mode of the assembly machine should be controlled by hand, and the movement of the components in the process of motor disassembly and assembly should be controlled by the configured hand wheel, so as to achieve the purpose of reasonable assembly and separation of the motor stator assembly and rotor assembly, and at the same time, the measurement of rotor magnetic induction strength, cold DC resistance of three-phase winding, and insulation resistance of three-phase winding to temperature sensor should be met in the process of disassembly and assembly. The main structure of the assembly machine is aluminum profile cutting and processing, and the lead screw module is operated in strict accordance with the lead screw processing technology, and is made by a series of processing processes such as cold drawing, knurling, turning threading, correction, cutting, chamfering, etc., and can be anti-rust and anti-corrosion by electroplating surface treatment. (2) The fault box in the fault detection area should be composed of machined aluminum components, support rods, magnets, mechanical locks, rubber feet, hinges, W transfer aluminum measuring panels, measuring circuit boards, measuring circuit board guards, fault setting panels, fault setting board linings, fault setting circuit boards, fault setting circuit boards, ignition switches, gear switches, brake switches, accelerator switches and other components. The measuring panel should be oxidized with printed aluminum and covered with insulating film to protect the printed circuit diagram on the basis of ensuring insulation and prevent scratches and scratches. Fault diagnosis and data measurement can also be carried out through the schematic diagram of the measurement panel, and the measurement circuit board should be welded with 2mm measurement terminals (with insulation sleeve), which can be used with multimeter pen for measurement.
Dimensions:
1650×820×1600(L×W×H) Power supply: 12V DC voltage Operating temperature: -10°C~+40°C
