Chassis drive-by-wire system assembly, adjustment and testing training platform

Product Overview:
The chassis-by-wire system assembly, commissioning, and testing training platform integrates theory and practice for understanding the working principles, assembly, commissioning, and troubleshooting of steer-by-wire, brake-by-wire, and drive-by-wire systems. It features practical training guidance, autonomous driving, manual driving, and remote driving modes, provides protocol control commands, and supports secondary development. This helps students deepen their understanding of chassis-by-wire systems, thereby achieving integrated theoretical and practical teaching for the Automotive Wire-Based Chassis and Intelligent Control course.

Features:
1. Demonstrates the structural components of the chassis-by-wire system, providing integrated theoretical and practical instruction on its working principles and assembly.
2. Equipped with an intelligent connected test and commissioning computing platform and control system kit, it can perform steer-by-wire, brake-by-wire, and throttle testing and commissioning, enabling comprehensive testing and commissioning of chassis-by-wire systems.
3. The intelligent connected comprehensive test and commissioning training vehicle can perform autonomous driving performance testing, including automatic acceleration and deceleration, automatic steering, and emergency braking.

Composition and Structure:

1. Vehicle Information

(1) Overall Length: 1608mm

(2) Overall Width: 800mm

(3) Overall Height: 1080mm

(4) Track: Front 686mm; Rear 692mm

(5) Wheelbase: 900mm

(6) Minimum Ground Clearance: 132mm

2. Curb Weight and Load

(1) Curb Weight: Approx. 90 kg

(2) Rated Load: 200KG

3. Chassis and Performance

(1) Steering Type: Ackermann Steering

(2) Braking Type: Hydraulic Brake/Reverse Braking

(3) Front/Rear Suspension Type: Hidden Spring Shock Absorbers

(4) Tire Specifications: 10-inch, 400mm Diameter

(5) Maximum Speed: 5km/h 0-50km (Adjustable)

(6) Driving Range: 45km/h km (fully charged, completed at a constant speed in one go)

(7) Braking distance: 10 or 8 km/h

(8) Minimum turning radius: 2.54m

4. Hill-climbing braking performance

(1) Climbing angle: ≤20%

(2) Obstacle clearance height: 8cm

(3) Safety protection: Level 3 anti-collision, infrared, touch stop, emergency brake button

5. Electric drive

(1) Motor type: Hub motor (permanent magnet)

(2) Motor power: 800W (single)*2

(3) Drive type: Front-wheel drive, rear-wheel drive

(4) Battery and management

(5) Battery parameters: 48V/10Ah

(6) Battery operating temperature: -20°~60°

(7) Charger: AC220V independent charger

(8) Charging time: ≤6h

(9) External power supply: 12V

(10) Anti-explosion rating (waterproof, dustproof) IP35

6. Other

(1) Communication interface: CAN provides standard communication protocol

(2) Motion control: VCU control

(3) Sensor type: Steering feedback sensor

(4) Walking wheel speed sensor

(5) Front and rear brake feedback sensor

Practical training projects:

1. Understanding of chassis drive-by-wire system

2. Drive-by-wire steering test, calibration and debugging

3. Drive-by-wire braking test, calibration and debugging

4. Drive-by-wire throttle test, calibration and debugging

5. Chassis drive-by-wire system performance test and debugging